All above ground pools need a cove. Read any pool manufacture's installation instructions and you will find: "The cove is a vital structural element of your pool." A cove is needed to keep the weight of the water in the pool liner from causing it to balloon out under the bottom of the pool wall. Previously, pool cove had to be hand built, in place, using tons of sand or dirt. Liner failures due to cove washout were all too common. Corrosion occurred rapidly where metal components, at the bottom of the pool, came in contact with moisture in the sand or dirt. Hand formed coves are uneven making cleaning difficult.
Pool Cove is a 48" long piece of foam that peels and stick to the inside base of your pool wall. This eliminates the need of having to manually build the cove out of sand. Pool Cove eliminates stress on your liner from water weight, which could cause damage to the liner.
Not sure how many strips you need, no problem. We offer Pool Cove in either single strips or pre-counted kits, just select the kit that's right for you.